Memory Usage Drive Object Reference Value / Mem_Use Do Ref Val; Memory Usage Oa Application / Mem_Use Oa; Software Error Internal Supplementary Diagnostics / Sw_Err Int Diag; Si Tm54F Communication Clock Cycle / Tm54F Comm_Cycle - Siemens SINAMICS G150 Manual

2 Parameters
2.2 List of parameters
r9992[0...4]

Memory usage drive object reference value / Mem_use DO ref val

CU_G130_DP, Can be changed: -
CU_G130_PN,
Data type: Unsigned32
CU_G150_DP,
P-Group: -
CU_G150_PN
Not for motor type: -
Min
-
Description: Displays the memory usage for each drive object as reference value.
Index: [0] = Fast Memory 1
[1] = Fast Memory 2
[2] = Fast Memory 3
[3] = Fast Memory 4
[4] = Heap
r9993[0...4]

Memory usage OA application / Mem_use OA

CU_G130_DP, Can be changed: -
CU_G130_PN,
Data type: Unsigned32
CU_G150_DP,
P-Group: -
CU_G150_PN
Not for motor type: -
Min
-
Description: Displays the memory usage of an OA application.
Index: [0] = Fast Memory 1
[1] = Fast Memory 2
[2] = Fast Memory 3
[3] = Fast Memory 4
[4] = Heap
r9999[0...99]

Software error internal supplementary diagnostics / SW_err int diag

CU_G130_DP, Can be changed: -
CU_G130_PN,
Data type: Unsigned32
CU_G150_DP,
P-Group: -
CU_G150_PN
Not for motor type: -
Min
-
Description: Diagnostics parameter to display additional information for internal software errors.
Note: Only for internal Siemens troubleshooting.
p10000[0...5]

SI TM54F communication clock cycle / TM54F comm_cycle

TM54F_MA, Can be changed: C2(95)
TM54F_SL
Data type: FloatingPoint32
P-Group: Safety Integrated
Not for motor type: -
Min
0.00000 [ms]
Description: Sets the safety communication clock cycle with which the TM54F communicates with a drive.
The communication clock cycle must correspond to the safety monitoring clock cycle of the drive.
Presently, the TM54F only supports one communication clock cycle for all drives.
This is entered into P10000[0].
Index: [0] = Drive 1
[1] = Drive 2
[2] = Drive 3
[3] = Drive 4
968
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
25.00000 [ms]
List Manual (LH2), 04/2014, A5E03263479A
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 4
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
[0] 12.00000 [ms]
[1...5] 0.00000 [ms]
SINAMICS G130/G150