r8913[0...3]
IE Subnet Mask of Station active / IE Subnet Mask act
CU_G130_DP,
Can be changed: -
CU_G130_PN,
Data type: Unsigned8
CU_G150_DP,
P-Group: -
CU_G150_PN
Not for motor type: -
Min
0
Description:
Displays the active subnet mask for the Industrial Ethernet interface (X127) on the Control Unit.
r8914
IE DHCP mode of station active / IE DHCP mode act
CU_G130_DP,
Can be changed: -
CU_G130_PN,
Data type: Unsigned8
CU_G150_DP,
P-Group: -
CU_G150_PN
Not for motor type: -
Min
0
Description:
Displays the active DHCP mode for the Industrial Ethernet interface (X127) on the Control Unit.
Note:
If value = 0:
DHCP deactivated.
If value = 2:
DHCP activated. The MAC address of this interface is used for client identification.
If value = 3:
DHCP activated. The station name of this interface is used for client identification.
r8915[0...5]
IE MAC Address of Station / IE MAC of Station
CU_G130_DP,
Can be changed: -
CU_G130_PN,
Data type: Unsigned8
CU_G150_DP,
P-Group: -
CU_G150_PN
Not for motor type: -
Min
0000 hex
Description:
Displays the MAC address for the Industrial Ethernet interface (X127) on the Control Unit.
p8920[0...239]
PN Name of Station / PN Name Stat
CU_G130_PN,
Can be changed: U, T
CU_G150_PN
Data type: Unsigned8
P-Group: -
Not for motor type: -
Min
-
Description:
Sets the station name for the onboard PROFINET interface on the Control Unit.
The active station name is displayed in r8930.
Note:
An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.
The interface configuration (p8920 and following) is activated with p8925.
The parameter is not influenced by setting the factory setting.
PN: PROFINET
SINAMICS G130/G150
List Manual (LH2), 04/2014, A5E03263479A
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
255
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
255
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
00FF hex
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
-
2 Parameters
2.2 List of parameters
Access level: 1
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 1
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 1
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
823