Trace Status / Trace Status; Measuring Function Status / Meas Fct Status; Measurement Function Configuration / Meas Fct Config - Siemens SINAMICS G150 Manual

2 Parameters
2.2 List of parameters
Bit field: Bit
00
Dependency: Refer to: p4700
Note: Re bit 00:
0: The trace starts with p4700 as before.
1: When powering up, the trace starts immediately with the saved parameter settings with the start of the time slices.
r4705[0...1]

Trace status / Trace status

CU_G130_DP, Can be changed: -
CU_G130_PN,
Data type: Integer16
CU_G150_DP,
P-Group: Trace and function generator
CU_G150_PN
Not for motor type: -
Min
0
Description: Displays the actual status of the trace.
Value: 0:
1:
2:
3:
4:
Index: [0] = Trace 0
[1] = Trace 1
r4706

Measuring function status / Meas fct status

CU_G130_DP, Can be changed: -
CU_G130_PN,
Data type: Integer16
CU_G150_DP,
P-Group: Trace and function generator
CU_G150_PN
Not for motor type: -
Min
0
Description: Displays the actual status of the measuring function.
Value: 0:
1:
2:
3:
4:
5:
p4707

Measurement function configuration / Meas fct config

CU_G130_DP, Can be changed: U, T
CU_G130_PN,
Data type: Integer16
CU_G150_DP,
P-Group: Trace and function generator
CU_G150_PN
Not for motor type: -
Min
0
Description: Setting to configure the measurement function.
Value: 0:
1:
Dependency: The parameter cannot be changed when the measurement function has been started (r4706 = 2, 3).
Note: This parameter involves the free measuring functions and is only active for p4810=6.
For value = 0:
The free measuring function is parameterized with master control.
For value = 1:
The free measuring function is parameterized without master control.
656
Signal name
Automatically start trace with time slices
Trace inactive
Trace is recording presamples
Trace is waiting for trigger event
Trace is recording
Recording (trace) ended
Measurement function inactive
Measuring function parameterization checked
Measuring function waits for stabilizing time
Measuring function recording (tracing)
Measuring function trace ended with error
Measuring function trace successfully completed
Standard
Free meas fct
1 signal
Yes
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
4
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
5
Calculated: -
Dyn. index: -
Units group: -
Scaling: -
Max
1
List Manual (LH2), 04/2014, A5E03263479A
0 signal
No
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
-
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 0
Factory setting
0
SINAMICS G130/G150
FP
-