Table of Contents
Advertisement
2.29.2 Call Control Feature
1.
Mailbox Password
Used as your mailbox password and when servicing in or out
2.
User PIN
Used when log in to the User Portal
Note
The mailbox password of each user is the same as the User PIN, which can be configured and edited in the
User Container. (Linked)
PC Programming Manual References
8.1 Users—User Container
Operating Manual References
1.13 User Device Management
2.29.1.5 Smart Desk Feature
Description
By using the service-in operation on the device user wants to use by entering their own extension number,
the user can use their extension as the telephone terminal.
For more information, refer to "2.24.4 Smart Desk Features".
2.29.1.6 Linking with LDAP User Information
Description
A part of the User Container settings can automatically be configured by linking the User Container to the
Active Directory (LDAP) that the user uses.
For more information, refer to "5.10 Configuration of Users—Synchronising User Information with an LDAP
Directory" in the Installation Manual.
Feature Manual References
2.6.5 Speed Dialing—External (LDAP)
2.29.2 Call Control Feature
2.29.2.1 Main Device/Device Common
Description
By calling the user's main device, it is possible to send an incoming call signal to the main devices, sub
devices, wireless devices and public devices registered in the User Container at the same time.
It is also possible to send an incoming call signal to a sub device, wireless device and/or public device at a
predetermined time delay from the time of an incoming call to the main device depending on the user
settings.
Conditions
The delay time can be configured for each device (you can choose from immediately, 5 seconds, 10
seconds, and 15 seconds). For details about the incoming call conditions for each device, see the section of
the respective device.
248
Feature Manual
Advertisement
Table of Contents
