Panasonic KX-NSX1000 Manual page 436

5.6.7 System Monitoring
•
Acquisition by MIB
The monitoring status of the target items can be acquired from the Management Information Bases
(MIBs).
(→ 5.6.4 Simple Network Management Protocol (SNMP) System Monitor)
•
Alarm Notification
If the target item is in a congested state, it is recorded in the Syslog, alarm notification will be performed.
(→ 2.22.1.2 Syslog Record Management)
Below the possible acquisition of items per acquisition method is shown.
Item
CPU Usage (%)
PBX Internal Memory Free Block
Usage (%)
Memory Usage (%)
SWAP memory empty capacity
(virtual memory usage) (KB)
Page In/Out Speed (Kbytes/s)
Disc Usage (%)
Internal Storage Lifespan
The amount of sent/received data
of each virtual NIC (Byte)
The amount of sent/received Loss
Packets of each virtual NIC
VoIP Call Quality Recording (IPPT
Terminal Call Quality Recording)
[Integrated Terminal Monitoring]
The operational status of terminals integrated to the system (IP telephone, Expansion Gateway) can also be
monitored with the KX-NSX series models. IP telephones, Expansion Gateways and DSP can be monitored.
The monitor method accumulates the results of the keep-alive every hour. The success rate is displayed
24/7 on the Web-MC. Furthermore, stored information can be obtained from the CSV files by use of the
Web-MC.
PC Programming Manual References
9.4 PBX Configuration—[1-1] Configuration—Slot—System Property—System Status
7.2.2 Utility—File—File Transfer PBX to PC
7.5.7 Utility—Report—Expansion Gateway Keep Alive Information
436 Feature Manual
CSV File Web-MC
Output Display
ü
ü ü
ü
ü
ü ü
ü
ü
ü
ü ü
Acquisition by
MIB Notification
ü
ü
ü
ü
ü
ü
ü
ü
ü
Alarm
ü
ü
ü
ü
ü