Table of Contents
Advertisement
2.6.3 Last Number Redial
Example: One-touch Voice Mail Feature Access
It is possible to assign a One-touch Dialling button for direct access to a Unified Messaging feature (→
3 Unified Messaging System). For example, to record a message to mailbox number 123 directly and the
UM group's floating extension number is 165, assign "165#6123" to a One-touch Dialling button. When
pressing this button, the mailbox's greeting message will be heard.
Conditions
•
One-touch Dialling Button
A flexible button can be customised as a One-touch Dialling button.
•
Full One-touch Dialling
There is no need to go off-hook before pressing the One-touch Dialling button.
PC Programming Manual References
8.2.1 Users—User's Device Settings—Device Settings—Option 6—Flexible Button Programming Mode
8.3.1 Users—User's Flexible Button—Wired Extension
→ Type
→ Dial (for One-touch)
8.3.2 Users—User's Flexible Button—Portable Station
→ Type
→ Dial (for One-touch)
Feature Manual References
2.21.2 Flexible Buttons
6.1 Capacity of System Resources
Operating Manual References
1.2.2 Easy Dialling
2.6.3 Last Number Redial
Description
Every extension automatically saves recently dialled external telephone numbers and extension numbers to
allow the same number to be dialled again easily. Through system programming, the outgoing call log can
be set to log dialled extension numbers.
Automatic Redial:
If Last Number Redial is performed in hands-free mode and the called party is busy, redialling will be
automatically retried a preprogrammed number of times at preprogrammed intervals. The Redial Call No-
answer Ring Duration time is programmable.
This feature is available only on certain PT models which have the SP-PHONE button.
Outgoing Call Log:
Information on outgoing trunk calls and intercom (including TIE) calls is automatically logged up at each
extension. Users of display PTs APT and DECT PS
telephone numbers, and easily call the same party again. By selecting Enable in the program settings, the
call logs of calls made to the extensions can be acquired.
DECT terminals can only use this function with models that can distinguish the data in the outward call logs between extensions
*1
outgoing and extensions incoming.
Conditions
[General]
98
Feature Manual
*1
can view details of a preset number of recently dialled
Advertisement
Table of Contents
