Table of Contents
Advertisement
5.5.3 DSP Resource Usage
[DSP usage graph]
•
The most recent 30 days of DSP usage is recorded.
•
The scale of the graph can be set to 1-hour, 4-hour, or 24-hour intervals.
•
The maximum value of the vertical axis is the maximum recorded DSP usage value, and not the available
DSP resource capacity.
•
To view the number of times DSP resources are measured as busy, see Counting of DSP busy times.
•
The state of DSP resource usage can be outputted as a CSV file by clicking Export. In this data it is
possible to view the busy status of reserved DSP resources for each service, as well as the data shown in
the graph.
•
If DSP resources are not reserved for each service, all DSP resources will be taken from free DSP
resources, and will be treated as free resources in the graph. In this case, the lines for free DSP
resources and total DSP resources will be the same. To accurately measure the amount of DSP
resources used for each service, reserve DSP resources for each service.
Installation Manual References
2.3.2 System Capacity—DSP Resources
4.3.3 DSP S Card (KX-NS0110), DSP M Card (KX-NS0111), DSP L Card (KX-NS0112)
PC Programming Manual References
9.14.2 PBX Configuration—[1-1] Configuration—Slot—V-IPGW128—Port Property—DN to Gateway—GW
Settings–Codec—IP Codec Priority—1st, 2nd, 3rd
9.5 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main
→ DSP CODEC G.711 only (SIP extension)
→ DSP CODEC G.711 only (IP-GW)
→ DSP CODEC Priority-1 value only (others)
9.12 PBX Configuration—[1-1] Configuration—Slot—V-IPGW128—Card Property
→ Voice Codec Priority 1st
→ Voice Codec Priority 2nd
→ Voice Codec Priority 3rd
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW128—Port Property—Voice/FAX—IP Codec
Priority—1st, 2nd, 3rd
9.16 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT128—Port Property—Option—IP Codec
Priority
9.20 PBX Configuration—[1-1] Configuration—Slot—V-IPCS16—Port Property—Option—IP Codec Priority
9.33 PBX Configuration—[1-5] Configuration—DSP Resource
Feature Manual References
2.14.2 Conference
2.28.2 Outgoing Message (OGM)
3.2 System and Subscriber Features
3.2.2.34 Two-way Record/Two-way Transfer
3.2.1.4 Automatic Two-way Recording for Manager
5.2.1 IP Proprietary Telephone (IP-PT)
5.2.2 SIP (Session Initiation Protocol) Extension
418
Feature Manual
Advertisement
Table of Contents
