Table of Contents
Advertisement
5.3.2 Trunk Adaptor Connection
•
The SIP trunk authentication ID and the authentication ID of the IP interface on the Trunk Adaptor must
be the same.
•
The channel attribute of SIP trunks connecting to a Trunk Adaptor must be set to Basic channel.
PC Programming Manual References
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW128—Port Property—Programming Port
Properties—Trunk Adaptor
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW128—Port Property—Main
→ Connection Attribute
→ Channel Attribute
9.14 PBX Configuration—[1-1] Configuration—Slot—V-IPGW128—Port Property
→ Trunk Adaptor
→ Connection Attribute
410
Feature Manual
Advertisement
Table of Contents
