Table of Contents
Advertisement
Programming Example
<Forward Destination of Public device name>
Ext. No. of the Public device name
2001
<Intercept Destination of Public device name>
Ext. No. of the
Public device name
2001
...
When extension 2001 is called from another extension or is the first destination
of an incoming trunk call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
Different intercept destinations can be programmed for each time mode (day/lunch/break/night).
[Available Intercept Destinations]
Wired Extension (PT/SLT/SIP Extension/ISDN Extension/T1-OPX)
PS
Incoming Call Distribution Group
PS Ring Group
UM Group
Fax Unit
External Pager (TAFAS)
DISA
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
Intercept for calls to an outside destination
When an intercom, trunk, or DISA call is received by an extension and forwarded to an outside destination
by FWD—All Calls or FWD—Busy, the Intercept Routing feature can be used, if the outside destination is
busy or does not answer. For example, when a call is forwarded to a cellular phone by FWD—All Calls, and
the cellular phone is busy, the call will be routed to Voice Mail in the PBX.
This feature is also available when a call is forwarded by FWD—No Answer under the following conditions:
–
The forwarding destination is in a private network and is busy or does not answer.
–
The forwarding destination is in a public network and does not answer.
FWD Destination
...
Intercept Destination
Day
Lunch
Break
1001
1001
1001
...
...
...
Intercept Destination
"600" is an example of a
Floating Extension No.
for the External Pager
600
...
...
Night
1001
...
...
...
2.1.1 Incoming Trunk Call Features
Availability
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
ü
Feature Manual
35
Advertisement
Table of Contents
