Incoming Call Log - Panasonic KX-NSX1000 Manual

Business communication server
Hide thumbs Also See for KX-NSX1000:
Table of Contents

Advertisement

2.19.2 Incoming Call Log

Incoming Call Log information is not shown on the SLT.
Caller ID shows whether the call is an intercom or trunk call by default. This setting can be disabled
through system programming.
A caller ID name received from the network via a PRI23 card will not be displayed on an SLT. However, if
the received caller ID matches a System Speed Dialling entry, and a name is registered for that entry, it
will be displayed.
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous
→ Caller ID—Waiting to receive
→ Caller ID—Visual Caller ID Display
10.9 PBX Configuration—[2-9] System—System Options—Option 4—Private Network—Public Call through
Private Network—Minimum Public Caller ID Digits
10.10 PBX Configuration—[2-10] System—Extension CID Settings
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—Main—Caller ID Modification
Table
8.2 Users—User's Device Settings—Option 8
→ Extension Caller ID Sending
→ Incoming Call Wait Timer for Extension Caller ID
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Feature Manual References
2.6.4 Speed Dialling—Personal/System
2.22.1.1 Station Message Detail Recording (SMDR)
2.19.2 Incoming Call Log
Description
When an incoming public trunk call with the caller's information (e.g., Caller ID) is directed to an extension,
the information is automatically recorded in the call log of the called extension. Also, depending on system
programming, incoming intercom calls (including over a TIE connection) are logged in the incoming call log.
This information is shown on the telephone display and is used for confirming the caller, calling back, or
storing the number and name in the Personal Speed Dialling.
KX-NSX series provide a feature which can sort the Incoming Call Log information into calls from outside
lines and calls from extensions.
The Incoming Call feature can be used with DPT, IP-PT, PS, IP-Softphone and APT.
190
Feature Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-nsx2000

Table of Contents