Table of Contents
Advertisement
Flexible DSS (Direct Station Selection)
PF (Programmable Feature)
Conditions
•
Certain buttons are equipped with a light to show line or feature status.
2.21.2 Flexible Buttons
Description
You can customise the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key
Modules, and PSs through either system or personal programming. They can then be used to make or
receive intercom or trunk calls or be used as feature buttons, as follows:
[Button Usage]
Button
Single-CO (S-CO)
Group-CO (G-CO)
Loop-CO (L-CO)
Direct Station Selection (DSS)
One-touch Dialling
Incoming Call Distribution (ICD)
Group
Message
FWD/DND (External/Internal/
Both)
*1
Group FWD (External/Internal/
Both)
Account Code Entry (Account)
Conference
Terminate
External Feature Access (EFA)
Charge Reference
Call Park
Button
Used to access a specified trunk for making or receiving calls.
Used to access an idle trunk in a specified trunk group for making
calls. Incoming calls from trunks in the assigned trunk group arrive
at this button.
Used to access an idle trunk for making calls. Incoming calls from
any trunk arrive at this button.
Used to access an extension with one touch.
Used to access a preprogrammed party or feature with one touch.
Used to access a specified incoming call distribution group for
making or receiving calls.
Used to leave a message waiting indication or call back the party
who left the message waiting indication.
Used to perform the FWD or DND feature for the extension. The
feature is applied to trunk calls, intercom calls, or both.
Used to perform the FWD feature for a specified incoming call
distribution group. The feature is applied to trunk calls, intercom
calls, or both.
Used to enter an account code.
Used to establish a multiparty conversation.
Used to disconnect the current call and make another call without
hanging up.
Used to send a flash/recall signal to the telephone company or
host PBX to access their features.
Used to check the total call charge for your own extension.
Used to park or retrieve a call in a preset PBX parking zone.
Used to access an extension with one touch. Every
button is programmed to correspond to an extension.
DSS buttons can also be reassigned to other features.
Used to access a preprogrammed feature with one
touch. (no default)
Usage
2.21.2 Flexible Buttons
Usage
Feature Manual
199
Advertisement
Table of Contents
