Table of Contents
Advertisement
The PBX can automatically check for and download updates from an FTP server. Also, a notification e-
mail can be sent to specified e-mail addresses when an update becomes available and when it is
downloaded.
Also, the PBX can be configured to check for updates automatically, but not to download them.
The installation of the updates needs to be performed manually at the Web Maintenance Console.
The software of the following types of devices and components can be updated:
Data Type
Main software data
LPR (software on a slot card) software
data
Cell Station (CS) and Portable Station
(PS) software data
IP-PT/SIP extension software data
Expansion gateway software data
Only available for certain PSs.
*1
Only Panasonic telephones are supported. For details about a specific telephone, refer to the telephone's documentation.
*2
PS Air Download
The firmware of certain PSs can be updated via an IP-CS. The following equipment supports this feature:
•
IP-CS: KX-NS0154
•
PS: KX-TCA185, KX-TCA285, KX-TCA385
Conditions
•
The software version of the mother board can be confirmed through system programming.
•
In a Multi-Connection network (→ 4.2 Multi-connection Networking), the main software of all units (Master
units and Expansion gateways) must be the same.
Installation Manual References
4.3.1 Mother Board
PC Programming Manual References
5.1 System Control—Program Update
9.2 PBX Configuration—[1-1] Configuration—Slot—Summary—Physical Shelf
*1
*2
Operating system data area on the PBX's mother board.
The main software data of other PBXs connected to a
Multi-Connection network as Expansion Gateways is also
updated.
Flash ROM on a slot card (e.g., BRI4+SLC2)
This includes the LPR software of legacy gateways
(→ 5.3.1 Stacking Connection).
Flash ROM on a CS and/or PS
This includes the Flash ROM on CSs connected through a
legacy gateway (→ 5.3.1 Stacking Connection).
Firmware of supported IP-PTs and SIP extensions
In a Multi-Connection network (→ 4.2 Multi-connection
Networking), the main software of Expansion gateways
and the software of devices connected to Expansion
Gateways can be transferred from the Master unit.
5.5.8 Software Upgrading
Description
Feature Manual
431
Advertisement
Table of Contents
