Table of Contents
Advertisement
→ 16.5.1 PBX Configuration—[8-5-1] ARS—Carrier—Main Setting—Carrier Access Code
Trunk Group
: Assign the trunk groups which connect to each carrier and the priority in which they
11
are selected.
When using Web Maintenance Console, trunk groups can be assigned to a carrier using an on/off
setting for each trunk group. They can also be given a priority setting (1–4) which decides the order they
are searched when seizing a line. If there are no available lines in the trunk groups set to priority 1–4,
the other trunk groups set to on are searched in the order of smallest number first.
[Example]
Carrier
1
ABC
9
XYZ
12
→ 16.5.2 PBX Configuration—[8-5-2] ARS—Carrier—TRG Priority—TRG Priority
→ 16.5.2 PBX Configuration—[8-5-2] ARS—Carrier—TRG Priority—TRG 01–TRG 128
Modify Command
: Assign the commands to modify the dialled number to access the carrier.
12
→ 16.5.1 PBX Configuration—[8-5-1] ARS—Carrier—Main Setting—Modify Command
CLIP Table No.
: Assign the CLIP number for the carrier. CLIP numbers are assigned according to the
16
CLIP Table No. assigned for the carrier.
→ 16.5.1 PBX Configuration—[8-5-1] ARS—Carrier—Main Setting—CLIP Table No.
[Command Explanation]
Command
Number
C
P
A
G
I
H
Priority Setting
2
3
3
1
4
None
None
Add the number.
Add the Carrier Access code.
Analogue Line: Insert a pause.
ISDN/T1/E1 Line: Insert a pause and change to tone (DTMF)
signal.
Add the Authorisation code for a tenant (
Add the Authorisation code for a trunk group (
Add the Itemised Billing code (
Add the dialled number after the digits are removed (Home
position).
2.8.1 Automatic Route Selection (ARS)
Trunk Groups
Set to On
4
7
5, 7, 9, 11
6, 10
Description
).
15
Searching Order
9 → 3 → 1 → 7 → 5 → 11
12 → 4 → 6 → 10
).
13
).
14
Feature Manual
121
Advertisement
Table of Contents
