Table of Contents
Advertisement
When a member of the original call leaves the conference created by Executive Busy Override, recording
will stop and the remaining extensions will operate as follows:
–
If Automatic Two-way Recording for Manager has been set, recording will start again according to
those settings.
–
If Automatic Two-way Recording for Manager has not been set, one of the parties can press the Two-
way Record button to start a new recording.
A call being recorded between 2 extensions cannot be monitored if the user performing Call Monitoring is
connected via QSIG (TIE).
•
Monitoring a Conference
When a user monitors a three-party conference, the voices of all 3 participants can be heard.
Executive Busy Override can also be performed on a three-party conference. In this case, a four-party
conference will be established.
Call monitoring cannot be performed on a conference on hold.
Call monitoring cannot be performed on a three-party conference where the originator of the conference
is on an outside line (e.g., when calling from a cellular phone).
A 3-party conference call cannot be monitored if the user performing Call Monitoring is connected via
QSIG (TIE).
PC Programming Manual References
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Executive—Call Monitor
8.2.1 Users—User's Device Settings—Device Settings
→ Option 2—Data Mode
→ Option 3—Executive Override Deny
Feature Manual References
2.14 Conference Features
3.2.1.4 Automatic Two-way Recording for Manager
3.2.2.34 Two-way Record/Two-way Transfer
5.1.1 Class of Service (COS)
Operating Manual References
1.2.4 When the Dialled Line is Busy or There is No Answer
1.15.1 Cellular Phone Features
2.10.4 Second Call Notification to Busy Extension
2.10.4.1 Second Call Notification to Busy Extension—SUMMARY
Description
When attempting to call a busy extension (ringing or having a conversation), an extension user can send a
Call Waiting indication to the busy extension (Call Waiting). The notification receiving method depends on
the called extension's personal setting and the telephone type:
Notification Receiving Method
Call Waiting Tone
2.10.4 Second Call Notification to Busy Extension
Description & Reference
Sends the Call Waiting tone to the busy extension.
→ 2.10.4.2 Call Waiting Tone
Feature Manual
133
Advertisement
Table of Contents
