Table of Contents
Advertisement
Distribution Method
Uniform Call
Distribution (UCD)
Priority Hunting
Ring
2.
Call Waiting for Incoming Call Distribution Group (Group Call Waiting)
When there are no available extensions in an incoming call distribution group, the group members can
receive the Call Waiting tone. To use this feature:
•
Select the Group Call Waiting mode through system programming. This determines the distribution
method for waiting calls.
•
Member extensions must assign the Call Waiting mode individually, or they will not be notified. (→
2.1.3.3 Call Waiting)
[How the Group Call Waiting Feature Activates]
Calls are distributed evenly to a different extension each time a call is
received. Extensions are hunted in a circular way in the
preprogrammed order for the group, starting at the extension after the
extension that received the last call.
Extn.
A
Received
the last call.
The call will be directed to the user that has been idle (the time that a
user has not been on a call on any of the owned devices) for the
longest period of time.
An idle extension is searched for using the preprogrammed order for
the group.
1st Priority
Extn.
A
Always starts searching from
the first assigned extension.
All extensions in the group ring simultaneously.
Delayed Ringing:
Delayed ringing or no ringing can be programmed for each extension
in the group. The call can be answered by pressing the flashing
button even if no ring or a delayed time is set.
Extn.
A
Rings immediately simultaneously.
2.2.2 Incoming Call Distribution Group Features
Description
Extn.
Extn.
B
C
Starts searching from
extn. B. (Skips extn. A.)
2nd Priority 3rd ....
Extn.
Extn.
B
C
Extn.
Extn.
Extn.
B
C
Delayed Ringing:
Rings after a
specified time delay.
Extn.
D
Extn.
D
D
Feature Manual
49
Advertisement
Table of Contents
