5.5 System Data Control
5.5 System Data Control
5.5.1 PC Programming
Description
There are three levels of authorisation for programming the PBX, where each level controls which settings
the programming is allowed to access and change. The three levels are as follows:
Level
Installer
User
(Administrator)
User (User)
Conditions
•
Each account is assigned a password that is required to log in.
•
Users can be added using the Add User Wizard.
Only 1 person can log in to the system for the system settings and maintenance.
CAUTION
To the Administrator or Installer regarding account passwords
1.
Please provide all system passwords to the customer.
2.
To avoid unauthorised access and possible abuse of the PBX, keep the passwords secret, and
inform the customer of the importance of the passwords, and the possible dangers if they become
known to others.
3.
The PBX has no passwords set initially. For security, select an installer password as soon as the
PBX system is installed at the site.
4.
Change the passwords periodically.
5.
It is strongly recommended that passwords of 10 numbers or characters be used for maximum
protection against unauthorised access.
Installation Manual References
5.3 Starting Web Maintenance Console
PC Programming Manual References
2.1.1 Web Maintenance Console Accounts
2.1.2 Access Levels
8 Users/Supervisors
Operating Manual References
3.2 System Programming Using Web Maintenance Console
414
Feature Manual
Description
For dealers and system installers
For on-site managers
For end users
Number of Accounts/Network
1
128
KX-NSX1000: 1000
KX-NSX2000: 2000