Table of Contents
Advertisement
After the caller's number is modified by the Length of Digits modification tables or CLIP modification
tables, the PBX checks the leading digits of the modified number for an area code programmed in the
Caller ID modification table assigned to that trunk group. For more information, refer to 11.1.3 PBX
Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification—Leading Digits in PC
Programming Manual.
[Example]
<Table Selection>
Trunk
Modification
Group No.
Table
1
1
2
3
:
:
Note
When caller's information is sent through an ISDN line and the call type is Subscriber, National, or
International, the following modification table is used instead of the above table:
<Modification Table>
Subscriber Call Data
National Call Data
International Call Data
<Modification Table>
Modification Table 1
Local/International
Call Data 1
Local/International
Call Data 2
:
Local/International
Call Data 10
Long Distance
Call Data
programmable
Removed No. of Digits Added No.
0
Blank
0
0
Area Code
Removed No. of Digits Added No.
3
012
2
00
:
:
Not
0
0
00
2.19.1 Caller ID
Blank
001
:
0
Feature Manual
187
Advertisement
Table of Contents
