Table of Contents
Advertisement
2.25.2 Confirmation Tone
All dial tone patterns have a default (→ 6.2.1 Tones/Ring Tones).
PC Programming Manual References
10.9 PBX Configuration—[2-9] System—System Options—Option 3
→ Dial Tone—Distinctive Dial Tone
→ Dial Tone—Dial Tone for Extension
→ Dial Tone—Dial Tone for ARS
2.25.2 Confirmation Tone
Description
At the end of feature operations, the PBX confirms the success of the operation by sending a confirmation
tone to extension users.
Tone 1
Tone 2
Tone 3-1
Tone 3-2
Tone 4-1
232
Feature Manual
Type
Description
1.
Sent when the setting is accepted.
2.
Sent when a call is received in voice-calling mode
(Alternate Receiving—Ring/Voice). The caller's
voice will be heard after the tone.
1.
Sent from an external paging device or an
extension before being paged.
2.
Sent when a call is received in Hands-free
Answerback mode.
1.
Sent before a conversation is established when
using the Paging feature.
2.
Sent when a conversation is established with the
extension in the following modes after the call
making operation:
•
Hands-free Answerback mode
•
Voice-calling mode (Alternate Receiving—Ring/
Voice)
3.
Sent when making a call to or from a doorphone.
Sent just before a conversation is established when
accessing the following features by the feature
numbers:
•
Call Park Retrieve
•
Call Pickup
•
Hold Retrieve
•
Paging Answer
•
TAFAS
Sent when moving from a two-party call to a three-
party call. (e.g., Executive Busy Override, Conference,
Privacy Release, Two-way Record.)
Advertisement
Table of Contents
