Table of Contents
Advertisement
PC Programming Manual References
20.1.1 UM Configuration—[1-2] Mailbox Settings—Basic Setting—Notification Parameters—Message
Waiting Lamp
Operating Manual References
Subscriber Operation
1.8.6 Other Features—Message Waiting Notification
Manager Operation
2.2.2 Message Manager Features—Setting Up Message Waiting Notification
3.2.1.31 Message Waiting Notification—Telephone Device
Description
Automatically calls a preprogrammed telephone number when a subscriber has new messages (both voice
and fax). New messages will be automatically played back when the subscriber answers the call.
Notifications can be scheduled. The System Administrator can program 2 different time frames (for example,
9 AM to 12 PM and 8 PM to 10 PM) independently for each day of the week. Message waiting notifications
will be sent on the selected days during the programmed time frames. Notifications can also be sent
"continuously", meaning a notification will be sent whenever a new message is received, 24 hours a day.
Conditions
•
Notifications can be sent for either all messages or for urgent messages only, depending on whether the
"Only Urgent Messages" setting is enabled. When it is enabled, notifications are sent (according to the
notification schedule, if programmed) only when urgent messages have been left in the subscriber's
mailbox.
•
A maximum of 3 devices can be programmed by the System Administrator or subscriber for use with this
feature. When the Unified Messaging system calls a device and the call is not answered, the system will
try to call the device again. The number of retries and the delay time between retries can be programmed
by the System Administrator. The lowest numbered device is called first. If the first device cannot be
called, the second (then third) device will be called.
PC Programming Manual References
20.1.1 UM Configuration—[1-2] Mailbox Settings—Basic Setting—Notification Parameters
→ Telephone Device
→ Telephone Device—Device No. 1, 2, 3—Notification Type
→ Telephone Device—Device No. 1, 2, 3—Only Urgent Messages
→ Telephone Device—Device No. 1, 2, 3—Dial Number [0-9 * # T X , ;]
→ Telephone Device—Device No. 1, 2, 3—No. of Retries
→ Telephone Device—Device No. 1, 2, 3—Busy Delay Time (min)
→ Telephone Device—Device No. 1, 2, 3—No Answer Delay Time (min)
→ Telephone Device—Device No. 1, 2, 3—Use Mode
→ Telephone Device—Device Notification Timer—Device Start Delay Time (0-120 min)
→ Telephone Device—Device Notification Timer—Device Interval Time between Device 1, 2, 3 and
Next Device
24.4 UM Configuration—[5-4] System Parameters—Parameters—Dialling Parameters/MSW Notification
Operating Manual References
Subscriber Operation
1.8.6 Other Features—Message Waiting Notification
Manager Operation
3.2.1 System Features
Feature Manual
283
Advertisement
Table of Contents
