[Example]
Note
"0" should be assigned as a Host PBX Access code for trunk group (TRG) 1 of the behind PBX.
Conditions
•
TRS/Barring
TRS/Barring checks only the dialled telephone number excluding the Host PBX Access code when
accessing the telephone company through the host PBX. (→ 2.7.1 Toll Restriction (TRS)/Call Barring
(Barring))
•
ARS
A pause is not automatically inserted between the user-dialled access code and the subsequent digits
when the ARS mode is enabled. (→ 2.8.1 Automatic Route Selection (ARS))
•
SMDR
The dialled number including the Host PBX Access code will be recorded on SMDR only if the modified
number setting is selected in the ARS setting for SMDR.
•
When a Host PBX Access code is assigned to a trunk group, calls to extensions of the host PBX are not
recorded on SMDR.
•
A Host PBX Access Code can be used to record only long distance calls on SMDR when a trunk port is
connected directly to the telephone company (not a host PBX). This is allowed when the long distance
Telephone Company
Host PBX
Access Code: 0
Host PBX
Idle Line
Access No.: 9
TRG1
PBX
Dials "9-0-01-23-4567".
Idle Line
Telephone No.
Access No.
Host PBX
Access Code
Outside Party
(01-23-4567)
Extn. 101
Extn. 102
Dials "0-01-23-4567".
Host PBX
Access Code
Telephone
No.
Dials "9-101".
Idle Line
Access No.
Extn. No.
of the Host PBX
2.5.4 Trunk Call Features
Feature Manual
91