Table of Contents
Advertisement
•
If a new number is dialled when the Outgoing Call Log is full and/or Automatic Redial contains a number,
the data of the oldest stored call will be deleted, and the new number will be stored.
•
If any dialling operations are performed or an incoming call is answered during Automatic Redial,
Automatic Redial is cancelled.
•
Automatic Redial may not be available depending on the busy tone pattern.
•
Automatic Redial is not available on SIP extensions.
•
Speed Dial External (LDAP) also supports redial, during redial the registered name of the external server
is shown on the LCD screen (Require AK KX-NSXF005).
•
Interrupt Redial
When an outside party, seized trunk, or extension number (including TIE connections) is busy, a user can
attempt to redial the number by pressing the REDIAL button without going on-hook. This can be
performed several times without having to go on-hook.
•
Outgoing Call Log Display by REDIAL Button
Pressing the REDIAL button on a display PT while on-hook can display the Outgoing Call Log. System
programming is required for this operation.
•
If the Outgoing Call Log is used to redial an outside party or an extension number (including TIE
connections) or if a number that is already stored in the Outgoing Call Log is manually redialled again, the
number will be stored in the call log multiple times. However, calls made using the REDIAL button are not
stored in the Outgoing Call Log again.
•
It is possible to change the number of records that can be stored at each extension through system
programming.
•
To log intercom calls in the outgoing call log, refer to "10.9 PBX Configuration—[2-9] System—System
Options—Option 7—Outgoing Call Log—Extension Call" in the PC Programming Manual.
•
Logs for multiple calls to the same destination are combined and displayed with the most recent call log.
•
If an extension user makes a call over a TIE connection using the PBX Code method (Access with PBX
Code), the outgoing call log does not display the Access Code on the PT's display.
•
If an extension user uses a DSS key to make a call to another extension, the user can use the redial
feature to call the same extension number.
•
If an extension user uses an SDN key to make a call to the corresponding owner extension, the user
cannot use the redial feature to call the owner extension again.
[Personal/System Speed Dialling Name Display]
•
When a trunk call is made from the Outgoing Call Log, if a name is registered to the Personal/System
Speed Dialling entry, the name is displayed on the second line of a display PT's LCD. The name is not
displayed on a phone with a one line LCD.
•
The redial name for System Speed Dial and outgoing calls using LDAP is shown up to 20 characters.
•
If a name is registered to the Personal/System Speed Dialling entry, when another call is made using the
REDIAL button after a trunk call is made using Personal/System Speed Dialling, the name is displayed on
the second line of a display PT's LCD.
•
If a name is registered to the LDAP server, the name is registered to redial entry.
When another call is made using the REDIAL button after a trunk call is made System Speed Dialling
External, the name is displayed on the second line of a display PT's LCD.
•
When a trunk call is made from the Outgoing Call Log, if a name is not registered to the Personal/System
Speed Dialling entry, the dialled number is displayed on a display PT's LCD.
•
If the number registered in the Personal/System Speed Dialling is changed after the number is recorded
in the Outgoing Call Log, the Personal/System Speed Dialling entry name will not be displayed. Instead,
the name registered in the Outgoing Call Log will be displayed.
2.6.3 Last Number Redial
Feature Manual
99
Advertisement
Table of Contents
