Table of Contents
Advertisement
Gateway type
4
KX-NS300
2.
Simplified Isolated Mode Settings
To use Simplified Isolation Mode, the operational settings of Simplified Isolation Mode need to be
configured beforehand. The during normal operation (Normal Mode) of the EXP-GW, it operates on
system data of the NSX, while it operates on system data specific for the used mode during Simplified
Isolated Mode.
Accordingly, the settings for Simplified Isolation Mode need to be configured individually.
The Simplified Isolation Mode becomes the setup (some functions are not available) for the NS series,
and is not affected by the User Container configuration.
See → 2.29 User Container
The individual setting of Simplified Isolated Mode can be carried out by any of the following.
a.
Initial Settings
When using the Easy setup wizard of the EXP-GW, the system data files for Simplified Isolation
Mode are automatically affected by the IP address and network settings of the NSX.
b.
Change Settings
The Web settings of the EXP-GW can also be changed during Simplified Isolation Mode.
The import of system data files through file transfer is possible.
c.
Settings of the Offline Settings Tool
Settings for Simplified Isolated Mode can be created and adjusted by use of the NS series Online
Tool. The created DxSYS files can be imported into the EXP-GW through the file transfer feature.
[Regarding System Data Files (DxSYS files)]
The system data files for Simplified Isolation Mode are different from the system data files (DxSYS) for
the EXP-GW (Normal Mode). The file name of the system data files for Simplified Isolation Mode are
the same as those of the NS series as shown in the table below.
GW type
KX-NS1000
KX-NS700
KX-NS500/300
In addition, the system data files for Simplified Isolation Mode can also be imported from either the
Normal Mode or Simplified Isolation Mode through the file transfer feature.
3.
Activation Key
An Activation Key is not required to use Simplified Isolated Mode.
During Simplified Isolation Mode the following Activation Keys will become license-free. However, the
license will only be valid for a period of 30 days.
Activation keys that have been installed and pre-installed during normal operation cannot be activated
again. Therefore the Activation Keys cannot be used during Simplified Isolation Mode.
Listed below are features that do not require a license.
Model number
KX-NSM099
Applicable
Including when connecting to an Expansion Unit
ü
Expansion GW system data file name
DCSYS_EXPGW
DFSYS_EXPGW
DFSYS_EXPGW
IP terminal capacity expansion (up to
640)
4.2.3 Multi-connection Networking Survivability
Remarks
Simplified Isolation Mode system
Features
data file name
DCSYS
DFSYS
DFSYS
Remarks
Only applicable for KX-NS1000
Feature Manual
337
Advertisement
Table of Contents
