Table of Contents
Advertisement
2.29.2 Call Control Feature
•
Intercepting calls on a public device with other devices, and from other devices with a public device
is not possible.
For the operation criteria, see 2.29.2.2 Sub Device—Description—4. Call—[Setting data between
devices].
[Call Waiting]
•
Sounds heard during a call (such as call waiting tones and hold alarms), are not sent to wireless
public devices.
3.
Calls from a cellular phone
[Password input abridgment of a cellular phone (DISA)]
It is possible to use DISA from the telephone number of a public device registered to the User
Container without having to input the extension + password.
Depending on the caller ID notified at call initiation, the call will be treated as if the "Walking COS
Access Code + main number of the User Container + Pin" was automatically entered after DISA's
response, when DISA responds to the call with a telephone number matching that of the public device
registered in the User Container.
It is also possible to use DISA from the telephone number registered to System Speed Dial without
having to input the extension + password.
Depending on the caller ID notified at call initiation, the call will be treated as if the "Walking COS
Access Code + extension number of the CLI caller destination extension + Pin" was automatically
entered after DISA's response, when it is registered in "CLI caller destination extension" when DISA
responds to the call with a telephone number matching the one registered in System Speed Dial (And
caller ID table). (Applies for all for NS Series)
The "CLI caller destination extension" includes, "CLI caller destination extension" settings and
"Automatic password authentication extension" settings.
Speed dial number
000
001
002
The telephone numbers of public devices registered to the User Container are prioritized over
telephone numbers registered to System Speed Dial.
•
After the extension number + password is automatically entered, the recorded OGM will be played
instead of the dial tone.
The same goes for when the extension number + password are not automatically entered at timings
such as when, the OGM message is playing or when manual DTMF dial is enabled.
•
Automatic input will not be performed, when the settings for the propriety of using DISA without
entering the expansion number + password is set on "Disabled".
Optional Device – DISA – System – Remote Walking COS through DISA without PIN (commonly
used for the NS Series)
•
An Advanced user license or a Mobile user license is required to use this feature (password
abridgment from DISA). The same goes for when the Availability settings of this feature are set to
"Disabled" at time of function limitations.
•
When calling again by using the "*" dial key, the message (OGM replay) will be heard without having
to enter the Walking COS Access Code + extension number.
•
The same goes for when SMDR, CTI, billing, and call restriction are entered manually.
•
"Password automatic authentication extension" will be treated as if automatic input was available
(walking COS enabled for the configured extension), even when it does not have a PIN setting
(including when it is locked).
256
Feature Manual
Telephone number
90344445555
90923334444
80100112013334444
Name
Call extension
Suzuki
105
Yamada
Tom
201
Advertisement
Table of Contents
