Sip (Session Initiation Protocol) Extension - Panasonic KX-NSX1000 Manual

5.2.2 SIP (Session Initiation Protocol) Extension

•
KX-NT307(PSLP1528) Bluetooth Module
A Bluetooth wireless headset can be registered to a KX-NT300 series (except KX-NT321) IP-PT
containing the KX-NT307(PSLP1528) Bluetooth Module through personal programming. When Headset
Mode is off, the Bluetooth headset can be used to answer calls or redial. In this case, Headset Mode will
turn on automatically, and will turn off after you hang up.
This Bluetooth Module is also compatible with KX-DT343/KX-DT346 DPTs.
•
Calls made using a Bluetooth wireless headset will not be disconnected immediately when the user
wanders out of range. However, if the Bluetooth wireless headset user remains out of range for a
specified time period, the call will be disconnected.
•
The following features, available when a legacy gateway is connected (→ 5.3.1 Stacking Connection),
cannot be used with an IP-PT:
–
XDP
–
Digital XDP
–
OHCA
Installation Manual References
4.4 Virtual Cards
PC Programming Manual References
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main—Main—IP Terminal Registration
Mode
9.15 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT128—Card Property
9.16 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT128—Port Property
5.2.2 SIP (Session Initiation Protocol) Extension
Description
This PBX supports the connection of SIP-compatible IP telephones (hardphones and softphones). SIP
extensions make and receive calls using Internet Protocol (IP).
For information about SIP extension compatibility with feature numbers, see 5.5.6 Flexible Numbering/Fixed
Numbering.
For information about Panasonic SIP phones (P-SIP), see 5.2.2.2 Panasonic SIP Phones (P-SIP).
Below are the features supported by SIP extensions:
•
Absent Message (→ 2.20.2 Absent Message)
•
Account Code Entry (→ 2.5.4.3 Account Code Entry)
•
Automatic Route Selection (ARS) (→ 2.8 Automatic Route Selection (ARS) Features)
•
Call Forwarding (FWD) (→ 2.3.2 Call Forwarding (FWD))
•
Call Hold (→ 2.13.1 Call Hold)
•
Call Park (→ 2.13.2 Call Park)
*1
•
Call Pickup (→ 2.4.3 Call Pickup)
•
Call Transfer with Announcement (→ 2.12.1 Call Transfer)
•
Call Waiting Tone (→ 2.1.3.3 Call Waiting)
•
COLR/CLIR/CLIP/COLP (→ 4.1.2.2 Calling/Connected Line Identification Presentation (CLIP/COLP))
•
Conference (→ 2.14 Conference Features)
*2
•
Conference Group Call (→ 2.15.1 Conference Group Call)
394 Feature Manual