21.1 UM Configuration—[2] Class of Service
Operating Manual References
Subscriber Operation
1.8.5 Transferring Calls—Remote Call Forwarding
Manager Operation
2.2.1 System Manager Features—Setting Class of Service (COS) Parameters
2.2.2 Message Manager Features—Remote Call Forwarding Set
3.2.2.30 Send to Fax Machine
Description
Through the voice mail guidance, a subscriber can send received faxes to another destination. This feature
can be used to send received faxes to a fax machine to print them out.
The subscriber can send faxes to the following destinations:
•
A preprogrammed fax machine
•
A fax machine specified by entering its number via the telephone
•
The fax machine the subscriber is calling from (if calling from a fax machine)
The subscriber can select which faxes are sent, as follows:
•
The current fax being "listened" to
•
All unprinted faxes
•
All faxes
Conditions
•
If the forward destination is busy, it will be retried a preprogrammed number of times. If the fax still cannot
be sent, a non-delivery notification message is sent to the subscriber's mailbox.
•
If an error occurs while sending the fax, whether to retry can be set through system programming. Also,
whether to send the fax again from the start or to send it from the page where the error occurred is also
programmable.
PC Programming Manual References
20.1.1 UM Configuration—[1-2] Mailbox Settings—Basic Setting—Fax Options—Fax Number Confirmation
3.2.2.31 Subscriber Tutorial
Description
Provides voice guidance to subscribers when they log in to their mailboxes for the first time. By following the
guidance, subscribers can configure the following items:
•
Password
•
Owner's Name
•
Personal Greetings (No Answer Greeting, Busy Signal Greeting, After Hours Greeting)
Note
If the simplified tutorial was selected through system programming, Busy Signal Greeting and After
Hours Greeting cannot be recorded.
3.2.2 Subscriber Features
Feature Manual
303