Table of Contents
Advertisement
There are two methods to call multiple PSs simultaneously using the floating extension number assigned
to the following groups:
Method
Incoming Call
Distribution Group
PS Ring Group
•
When a PS joins a PS ring group, the following personal settings are disregarded:
1.
When the PS ring group is called:
–
Delayed Ringing
–
Display information when the incoming calls arrive;
The settings (e.g., display priority) are disregarded.
–
The setting which is assigned on the PS (e.g., FWD)
–
The status of the PS (e.g., busy)
2.
Log-in/log-out setting (from the PS ring group/from the incoming call distribution group which the PS
ring group belongs to). (→ 2.2.2.7 Log-in/Log-out)
Note
Log-in/log-out setting of the PS ring group from the incoming call distribution group is also
disregarded.
Log-out
Log-in
Assignment
Assign all desired PSs to
one incoming call
distribution group, and set
the group call distribution
method for the group to
"Ring".
→ 2.2.2 Incoming Call
Distribution Group
Features
Assign all desired PSs to
one PS ring group.
PS Ring Group
5.2.4 Portable Station (PS) Features
Merit
All PS users in the
group can use the
Log-in/Log-out
feature, Wrap-up
feature, and ICD
Group button for the
group.
Only one channel is
used when a call
arrives at the group.
Demerit
The CS may often be
busy as each PS in
the group uses one
channel when a call
arrives at the group.
PS users in the
group cannot use the
Log-in/Log-out and
Wrap-up features.
Feature Manual
403
Advertisement
Table of Contents
