Table of Contents
Advertisement
5.1.4 Time Service
Tenant 2: COS 3 and COS 4
Tenant 3: COS 5 and COS 6
2.
Tenant-to-Tenant Call Block enables by the Internal Call Block feature.
a.
Tenant 1 (COS 1 and COS 2) can make calls to both Tenant 2 (COS 3 and COS 4) and Tenant
3 (COS 5 and COS 6) as well as Tenant 1.
b.
Tenant 2 (COS 3 and COS 4) can make calls to Tenant 1 (COS 1 and COS 2) and Tenant 2.
c.
Tenant 3 (COS 5 and COS 6) can make calls to Tenant 3 itself only.
•
An incoming call distribution group must belong to one tenant because the following features are
determined on a tenant basis (→ 2.2.2.1 Incoming Call Distribution Group Features—SUMMARY):
–
Music on Hold while a call is waiting in the queue
–
The Time Table which determines the overflow destination
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM
→ PBX Operator—Day, Lunch, Break, Night
→ BGM and Music on Hold—Music on Hold
10.4 PBX Configuration—[2-4] System—Week Table
10.5 PBX Configuration—[2-5] System—Holiday Table
10.7.3 PBX Configuration—[2-7-3] System—Class of Service—Internal Call Block
11.2 PBX Configuration—[3-2] Group—User Group
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—Main—
Tenant Number
8.2 Users—User's Device Settings—User Group
13.1 PBX Configuration—[5-1] Optional Device—Doorphone—Tenant Number
13.5 PBX Configuration—[5-5] Optional Device—External Sensor—Tenant No.
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
14.6 PBX Configuration—[6-6] Feature—Tenant
16 PBX Configuration—[8] ARS
16.5 PBX Configuration—[8-5] ARS—Carrier—16.5.3 PBX Configuration—[8-5-3] ARS—Carrier—
Authorisation Code for Tenant
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL—Tenant Number
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—Tenant Number
18.4 PBX Configuration—[10-4] CO & Incoming Call—MSN Table—MSN—Tenant Number
Feature Manual References
6.1 Capacity of System Resources
5.1.4 Time Service
Description
This PBX supports day, night, lunch, and break modes of operation. TRS/Barring can be arranged
separately. The destination of incoming calls can be set differently for each mode.
1.
Time Service Switching Mode
Day/lunch/break/night mode can be switched either automatically or manually. The switching mode can
be assigned for each tenant.
The switching mode can also be changed by pressing the Time Service Switching Mode (Automatic/
Manual) button. This can be performed by only an extension assigned as the manager, or
preprogrammed extension on a COS basis.
386
Feature Manual
Advertisement
Table of Contents
