Table of Contents
Advertisement
External Pager (TAFAS)
DISA
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
•
FWD/DND Mode
While searching for an idle extension within an idle extension hunting group, any extension that has set
FWD—All Calls or DND feature will be skipped, and the call will go to the next extension in the group.
PC Programming Manual References
11.6 PBX Configuration—[3-6] Group—Extension Hunting Group
11.6.1 PBX Configuration—[3-6] Group—Extension Hunting Group—Member List
Feature Manual References
2.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
6.1 Capacity of System Resources
2.2.2 Incoming Call Distribution Group Features
2.2.2.1 Incoming Call Distribution Group Features—SUMMARY
Description
An incoming call distribution group is a group of extensions programmed through system programming.
→ 11.5.1.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings—
Member List
An incoming call distribution group receives calls directed to the group. Each incoming call distribution group
has a floating extension number (default: 6 + two-digit group number [up to group 64]).
Incoming calls directed to an incoming call distribution group are distributed to the member extensions in the
group using a distribution method. When a preprogrammed number of extensions in the group are busy, the
incoming calls can wait in a queue.
Each incoming call distribution group and member extensions can be programmed as desired to handle
incoming calls. Calls to the group can be monitored by an extension assigned as a supervisor.
11.5.1 PBX Configuration—[3-5-1] Group—Incoming Call Distribution Group—Group Settings
→ Main
→ Overflow Queuing Busy
→ Overflow No Answer
→ Miscellaneous
Destination
2.2.2 Incoming Call Distribution Group Features
Availability
ü
ü
ü
ü
ü
ü
Feature Manual
45
Advertisement
Table of Contents
