Table of Contents
Advertisement
2.1.3 Incoming Call Indication Features
2.1.3 Incoming Call Indication Features
2.1.3.1 Incoming Call Indication Features—SUMMARY
Description
Incoming calls are indicated by various methods as follows:
Type
Ring Tone
Voice-calling
LED
(Light Emitting Diode)
Display (Caller's
Information)
External Pager
Tone/Voice during a
Conversation
2.1.3.2 Ring Tone Pattern Selection
Description
It is possible to select the type of ring tone pattern that arrives at an extension for each type of incoming call,
etc.
40
Feature Manual
Feature
Ring Tone Pattern
Selection
Alternate Receiving—
Ring/Voice
LED Indication
Display Information
Trunk Answer from
Any Station (TAFAS)
Call Waiting
Description & Reference
A telephone rings when receiving a call. The ring
tone patterns can be changed for each incoming
call type.
→ 2.1.3.2 Ring Tone Pattern Selection
A PT user can select to receive intercom calls by
ring tone or by voice, through personal
programming.
→ 2.5.3 Intercom Call
The light shows line conditions with a variety of
light patterns.
→ 2.21.3 LED Indication
The display shows the caller's information.
→ 2.21.4 Display Information
The external pager sends a ring tone when
receiving a call.
→ 2.17.2 Trunk Answer From Any Station
(TAFAS)
A busy extension hears a tone, or voice from the
handset/built-in speaker indicating that another
incoming call is waiting.
→ 2.1.3.3 Call Waiting
Advertisement
Table of Contents
