13.3.1 PBX Configuration—[5-3-1] Optional Device—Voice Message—DISA System—Option 1—DISA
Intercept—Intercept when all DISA ports are busy
18.5 PBX Configuration—[10-5] CO & Incoming Call—Miscellaneous
→ Intercept—Intercept Routing - DND (Destination sets DND.)
→ Intercept—Routing to Operator - No Destination (Destination is not programmed.)
→ Intercept—Intercept Routing for Extension Call
Feature Manual References
2.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
2.1.1.7 Intercept Routing—No Destination
Description
Provides automatic redirection of incoming trunk calls that do not have a destination assigned. The intercept
destination is an operator (tenant/PBX).
Conditions
•
Intercept Routing—No Destination on/off
The Intercept Routing—No Destination feature can be enabled or disabled through system programming.
If disabled, a reorder tone will be sent to the caller. However, the Intercept Routing—No Destination
feature always functions for calls through the ELCOT/CLCOT/LCOT, or T1 (LCOT/GCOT) card even
when disabled.
•
If an operator (tenant/PBX) is not assigned:
The extension that is connected to the lowest-numbered port and is ready to receive calls will be the
intercept destination.
•
Intercept Routing—No Destination also applies to calls from doorphones.
PC Programming Manual References
10.2 PBX Configuration—[2-2] System—Operator & BGM—PBX Operator—Day, Lunch, Break, Night
18.5 PBX Configuration—[10-5] CO & Incoming Call—Miscellaneous—Intercept—Routing to Operator - No
Destination (Destination is not programmed.)
Feature Manual References
5.1.5 Operator Features
2.1.2 Internal Call Features
2.1.2.1 Internal Call Features—SUMMARY
Description
The following types of internal calls are available:
Feature
Intercom Call
Description & Reference
A call from one extension to another.
→ 2.5.3 Intercom Call
2.1.2 Internal Call Features
Feature Manual
37