Table of Contents
Advertisement
2.1.1 Incoming Trunk Call Features
Trunk Card
Type
E1
E & M
ü*: Enable (default); ü: Enable
5.
Available Destinations
Wired Extension (PT/SLT/SIP Extension/ISDN Extension/T1-OPX)
PS
Incoming Call Distribution Group
PS Ring Group
UM Group
Fax Unit
External Pager (TAFAS)
DISA
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
6.
Intercept Routing
After setting distribution, it may also be necessary to set the following features.
Intercept Routing
PC Programming Manual References
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings—DIL—Trunk Property
24
Feature Manual
Channel Type
DR2
E & M-C
E & M-P
—
Destination
Feature
No Answer (IRNA)
Busy/DND
No Destination
Feature
DIL
DID/DDI
ü
ü*
ü*
ü*
Description & Reference
If a called party does not answer a call within a
preprogrammed time period (Intercept time), it is
redirected to the preprogrammed destination.
→ 2.1.1.6 Intercept Routing
If a called party is busy or in DND mode, the call is
redirected to the preprogrammed destination.
→ 2.1.1.6 Intercept Routing
If a destination is not assigned, the call is redirected
to the operator.
→ 2.1.1.7 Intercept Routing—No Destination
MSN
ü*
ü
ü
Availability
ü
ü
ü
ü
ü
ü
ü
ü
ü
Advertisement
Table of Contents
