Table of Contents
Advertisement
5.5.6 Flexible Numbering/Fixed Numbering
The features which are available while dialling or talking have fixed numbers as shown in the following
table:
[Fixed Numbering Table (available while dialling or talking)]
Pulse to Tone Conversion
Conference
*8
Door Open
*9
SIP extension users can use these feature numbers except Parallel Telephone Mode, incoming call queue monitor, BGM Set/
*1
Cancel, Timed Reminder.
From a SIP extension, this feature number can be used only for Call Park Retrieve.
*2
This feature number is used for the SIP-carrier transfer feature. For more information, see 2.12.2 SIP Refer Transfer.
*3
You cannot configure a public device as a CTI Control target.
*4
It is possible to register Quick Dialling numbers that overlap with other registered numbers. This is used for the Automatic
*5
Rerouting of VoIP Calls To Public Trunk feature.
SIP extensions cannot perform DND Override, Executive Busy Override, Message Waiting, Parallel Telephone Mode, Alternate
*6
calling, or Call Monitor, but can be the recipient of them.
To use Call Waiting/DND Override, both "1" and "2" are available by default.
*7
SIP extensions cannot establish conferences but can participate in them.
*8
SIP extension users can use these feature numbers.
*9
Conditions
•
All features have a default feature number.
•
The following are examples of feature number conflicts: 1 and 11, 0 and 00, 2 and 21, 10 and 101, 32 and
321, etc.
•
Feature number + Additional number (Parameter)
Some flexible feature numbers require additional digits to make the feature active. For example, to set
Call Waiting, the feature number for "Call Waiting" must be followed by "1" and to cancel it, the same
feature number should be followed by "0".
•
If a feature number includes " " or "#", rotary SLT users cannot use it.
•
ISDN extension users cannot use the following features:
–
OGM playback/record
–
Call Hold/Call Hold Retrieve (held at its own extension)
–
ISDN Hold
–
MCID
–
Call Waiting
–
Hot Line
–
Timed Reminder
–
Executive Busy Override
–
Call Monitor
–
Automatic Callback Busy/CCBS
•
PS users cannot use the following features:
–
Personal Speed Dialling
–
OGM playback/record
–
S-CO Line Access
–
Parallel Telephone Mode set/cancel
428
Feature Manual
Feature
Fixed Numbering
3
5
Advertisement
Table of Contents
