Table of Contents
Advertisement
3.1.3 Fax Server
Method
During playback of personal
message, or during message
recording
DISA
Conditions
•
Hardware requirement:
FAX Card (KX-NS0106) with KX-NS1000 as Expansion Gateway
•
COS programming determines which subscribers/mailboxes can send and receive faxes.
•
A header is added to each page, except the cover page
it can be specified whether the sender's information (system fax number) or the recipient's information
(name or fax number) is included in the header.
→ 24.4 UM Configuration—[5-4] System Parameters—Parameters—Fax Management—Page
Retransmission
•
Fax activity is recorded in the fax report. (→ 3.1.2.5 System Reports)
•
Simplified Isolated Mode
•
Even if a Fax Card is integrated into the Expansion Gateway, the fax feature cannot be used during
Simplified Isolated Mode
•
Error handling
Through system programming, it can be specified whether a fax is retransmitted if an error occurs while
sending a fax.
→ 24.4 UM Configuration—[5-4] System Parameters—Parameters—Fax Management—Page
Retransmission
If the fax is sent from a computer (→ 3.2.2.15 Fax Driver), the header is printed on the cover page as well.
*1
PC Programming Manual References
5.3 System Control—FAX Card
9.5.2 PBX Configuration—[1-1] Configuration—Slot—Site Property—FAX Card
20.1.1 UM Configuration—[1-2] Mailbox Settings—Basic Setting—Fax Options
21.1 UM Configuration—[2] Class of Service—General—Fax Option
24.4 UM Configuration—[5-4] System Parameters—Parameters—Fax Management
Feature Manual References
3.2.1.31 Message Waiting Notification—Telephone Device
3.2.2.2 Automatic Fax Delivery
3.2.2.15 Fax Driver
3.2.2.30 Send to Fax Machine
3.3.1 Integration with Microsoft Outlook
268
Feature Manual
If a fax tone is detected while a subscriber's personal message is
being played or while a message is being recorded, the fax can
be received at that mailbox.
If the sender leaves a voice message before sending the fax, the
voice message is attached to the fax as a voice comment.
If a DISA line detects a fax tone and forwards the call to the UM
group's floating extension number (→ 2.16.2 Automatic Fax
Transfer), the call is forwarded to a specified mailbox.
→
24.4 UM Configuration—[5-4] System Parameters—
Parameters—Fax Management
, of all sent faxes. Through system programming,
*1
Explanation
Advertisement
Table of Contents
