Table of Contents
Advertisement
Conditions
CAUTION
The software contained in the ARS feature to allow user access to the network must be upgraded to
recognise newly established network area codes and exchange codes as they are placed into service.
Failure to upgrade the on-premise PBXs or peripheral equipment to recognise the new codes as they
are established will restrict the customer and users of the PBX from gaining access to the network and
to these codes.
KEEP THE SOFTWARE UP TO DATE WITH THE LATEST DATA.
•
Dialled Number on SMDR
It is possible to choose to print either the user-dialled number or the modified number on SMDR through
system programming. (→ 2.22.1.1 Station Message Detail Recording (SMDR))
→ 19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options—Option—ARS Dial
•
ARS Data Download/Upload
It is possible to download or upload the following ARS data to the PBX using PC programming:
–
ARS Leading Number Exception Table
2
–
ARS Leading Number Table
3
–
ARS Routing Plan Table
4
→ 6.5 Tool—Import
→ 6.6 Tool—Export
This is useful when a carrier has changed the call charge, and the updated data can be used for multiple
customers.
•
A TRS/Barring check is done before ARS is applied. (→ 2.7.1 Toll Restriction (TRS)/Call Barring
(Barring))
PC Programming Manual References
6.5 Tool—Import
→ ARS - Leading Digit
→ ARS - Except Code
→ ARS - Routing Plan
6.6 Tool—Export
10.3 PBX Configuration—[2-3] System—Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Extension
Inter-digit
10.9 PBX Configuration—[2-9] System—System Options—Option 3—Dial Tone—Dial Tone for ARS
8.2.1 Users—User's Device Settings—Device Settings—Option 1—ARS Itemised Code
14.3 PBX Configuration—[6-3] Feature—Verification Code—Itemised Billing Code for ARS
16 PBX Configuration—[8] ARS
19.1 PBX Configuration—[11-1] Maintenance—Main—SMDR Options—Option—ARS Dial
Feature Manual References
6.1 Capacity of System Resources
2.8.1 Automatic Route Selection (ARS)
Feature Manual
123
Advertisement
Table of Contents
