–
BGM set/cancel
–
Timed Reminder
•
SIP extension users cannot use the following features:
–
Parallel Telephone (Ring) Mode set/cancel
–
Outgoing Message (OGM) playback/record/clear
–
TAFAS—Calls through an External Pager
–
Call Hold/Call Hold Retrieve
–
Call Park/Call Park Retrieve
–
External Relay
–
External Feature Access
–
ISDN Hold
–
MCID
–
ISDN-FWD set/cancel/confirm
–
Main device Service-in
–
Sub device Service-in
–
PS Service-in
–
Service-out
–
Hot Line programme/set/cancel
–
Printing Message
–
Trunk Busy Out Clear
PC Programming Manual References
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
→ Extension
→ Features
→ Other PBX Extension
10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature
Feature Manual References
3.1.1 Unified Messaging System Overview
5.2.4.1 Portable Station (PS) Connection
6.1 Capacity of System Resources
Operating Manual References
5.3.1 Feature Number Table
5.5.7 Floating Extension
Description
Virtual extension numbers can be assigned to resources to make them appear as extensions. This feature is
also known as Floating Station.
These numbers are defined as floating extension numbers and can be assigned as a destination of
incoming calls etc.
5.5.7 Floating Extension
Feature Manual
429