Table of Contents
Advertisement
2.29.1 User Container
301 304
302
303
3.
Deleting a User
The association with the sub device, settings used in order to use the public device, and the recording
data in the UM mailbox will all be erased when deleting a user.
The used Activation Key will also be released, allowing you to use it on other users. The information
related to the groups to which the user belongs will be cleared in the same way.
4.
Activating a user
Activation is an operation which reflects the creation of a new user or changes in the user settings on
the actual operations.
At this time, the required Activation Key will be consumed.
5.
User Container Back-up/Restore
It is not possible to restore or perform a separate backup of the User Container. Setting data of the
Export/Import feature and system data, can be alternated by the backup/restore function of the UM
data.
Conditions
•
Users using a device can also be deleted, all calls of the operational state are released, and the device
will be serviced out. (Active calls will be ended when the user gets deleted.)
•
When assigning an Activation Key that is currently being used to another user, the user using it must first
be deleted.
•
Please be careful of the following things when adding a new user.
–
A new user can be created, even if the device of the specified extension number or wireless device
does not exist when adding a user.
–
The automatic re-create feature (automatically delete all the settings and regenerate the user with the
specified number) of the user is not supported.
–
When you specified an extension number that is already being used while adding a user, an error will
be displayed, a user creation result log will be left, and you will be unable to add a user.
–
Added users will not be deleted even if you perform the Service-out operation.
–
You cannot register only a sub device or only a wireless device when the main device is not configured.
–
The following will be displayed in the Service-out status, disabling you to use any services.
–
However, the Forward setting is not affected by the Service-in/Service-out Operation.
246
Feature Manual
Main
301 304
Automatically changes in
response to the change
in the registered number
Mailbox
301 304
Automatically changes
in response to the user
number change
Advertisement
Table of Contents
