Table of Contents
Advertisement
•
For one-numbered extensions, the main extension and sub extension operate separately according to
their individual call pickup group monitoring settings.
•
Telephones that support this feature are as follows:
–
IP-PTs
*1
–
DPTs
*1
Except models with a single line LCD.
*1
•
Extensions that are subject to restrictions through COS (e.g., restrictions on internal or trunk calls) cannot
display monitoring information.
•
This feature is not affected by whether a DSS button is set to pick up a call at a specified extension.
•
Telephones in the following states cannot use this feature:
–
When in wrap-up mode
–
When waiting on the Automatic Redial feature
–
When displaying CTI information on the LCD
–
When receiving a paging call
•
Caller information will be displayed while listening to background music.
•
The LCD corresponds with the call waiting tones 1, 2, and 3 as follows.
Monitor cycle (15 s)
Tone 1
Tone 2
Tone 3
Monitor display time
(Default: 5 s)
PC Programming Manual References
10.3 PBX Configuration—[2-3] System—Timers & Counters—Miscellaneous—Call Pickup Group Monitor—
LCD Display Duration (s)
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main—Features
→ Group Call Pickup
→ Directed Call Pickup
→ Call Pickup Deny Set / Cancel
10.7.1 PBX Configuration—[2-7-1] System—Class of Service—COS Settings—Assistant—Call Pickup by
DSS
10.9 PBX Configuration—[2-9] System—System Options—Option 4
→ DSS Key—DSS key mode for Incoming Call
→ DSS Key—Call Pick-up by DSS key for Direct Incoming Call
→ DSS Key—Call Pick-up by DSS key for ICD Group Call
→ DSS Key—Caller Information Display before Call Pick-up
11.3 PBX Configuration—[3-3] Group—Call Pickup Group
2.4.3 Call Pickup
Feature Manual
81
Advertisement
Table of Contents
