Table of Contents
Advertisement
Operating Instructions
1
Camera Monitoring
1.1
Product Feature Locations
Front View
Power Indicator
The color display shows this product's status.
Indicator Display
Power
on
Normal Operation*
Automatic
Setup
Using
DHCP
Updating Firmware
Pressing FACTORY
DEFAULT RESET button
UPnP
Internal Failure
*
The indicator turns orange if this product is not connected to the LAN.
1
*
The indicator blinks orange if this product is not connected to the LAN.
2
*
See page 4 of the Troubleshooting on the Setup CD-ROM.
3
10
Status
Not on the LAN
On the LAN
1
Setting
Finished setting
Getting IP address*
Got IP address
TM
Failure
Indicator Operation
Orange blinking
Orange blinking
Green blinking
Green blinking
2
Green blinking
Orange blinking
Orange blinking
(This product restarts after that.)
Orange blinking (About a 2-second interval)
Red blinking*
SD Memory Card Slot
Insert the SD Memory
card.
(see page 165)
FACTORY DEFAULT
RESET Button
Pushing the button resets
this product to factory
default.
(see page 145)
Green blinking
Green
Green
Green
Turning off
3
Green
Advertisement
Table of Contents
