Panasonic KX-NSX1000 Manual page 267

Business communication server
Hide thumbs Also See for KX-NSX1000:
Table of Contents

Advertisement

integrated. Received faxes can be saved in mailboxes and then forwarded, printed, downloaded, etc. Also,
subscribers, the Message Manager, and the System Manager can send faxes. Each Fax board should be
assigned virtual extension number, then assign pilot number for these FAX number. This mainly manages
the FAX device connected to several sites and assigns the vacant FAX devices.
The Unified Messaging system can be configured to receive faxes in the following ways:
Method
Trunk/port service
Caller ID/PIN routing
DIL/DDI/DID/MSN routing
Custom service
Top menu of a call service
Setting the incoming call service of a service group to fax service
and then assigning the service group to a port allows faxes to be
received at that port.
The mailbox to which faxes are forwarded must also be specified.
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—
Service Group—Day, Night, Lunch, and Break Mode -
Incoming Call Service
Setting the transfer destination for caller ID routing or PIN routing
to fax service allows faxes to be received from the specified
phone number.
The mailbox to forward faxes to must also be specified.
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN
Call Routing—Caller-ID Mode
23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN
Call Routing—PIN Mode
Routing a call to the Unified Messaging system via
DIL/DDI/DID/MSN and assigning that entry a UM service group
(→ 3.2.1.40 Service Group) whose service type is Fax allows
faxes to be received through that line.
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL
Table & Port Settings—DIL—UM Service Group No.
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI /
DID Table—UM Service Group No.
18.4 PBX Configuration—[10-4] CO & Incoming Call—MSN
Table—MSN—UM Service Group No.
Setting the service type for a custom service to fax service allows
faxes to be received through that custom service.
The mailbox to forward faxes to must also be specified.
23.3 UM Configuration—[4-3] Service Settings—Custom
Service
If a fax tone is detected at the top menu of a call service, the fax
is received and then saved in a specified mailbox.
24.4 UM Configuration—[5-4] System Parameters—
Parameters—Fax Management
Explanation
3.1.3 Fax Server
Feature Manual
267

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-nsx2000

Table of Contents