Table of Contents
Advertisement
5.2.4 Portable Station (PS) Features
•
In an environment where P2P communication between IP extensions and IP trunks is not allowed due to
provider restrictions, set IP Extension - SIP Trunk P2P to disable, or assign different P2P group settings
between callers.
Note
During P2P communication, DTMF signals cannot be detected by the PBX since sound RTP packets
are processed directly between IP extensions and IP trunks. As a result, features that use DTMF
detection (e.g., DISA Call Transfer to Outside User) cannot be used. To use such features, change the
settings to allow for non-P2P calls, to create an environment where DTMF detection is available.
Confirm with your ITSP whether there are services which use DTMF detection and whether P2P
communication is possible.
Installation Manual References
4.3.3 DSP S Card (KX-NS0110), DSP M Card (KX-NS0111), DSP L Card (KX-NS0112)
PC Programming Manual References
9.5.1 PBX Configuration—[1-1] Configuration—Slot—Site Property—Main—VoIP-DSP Options
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW128—Port Property—Main— P2P Group
9.11 PBX Configuration—[1-1] Configuration—Slot—V-SIPGW128—Port Property—Main—P2P Group
Name
9.16 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT128—Port Property—Main—P2P Group
9.16 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT128—Port Property—Main—P2P Group Name
9.16 PBX Configuration—[1-1] Configuration—Slot—V-IPEXT128—Port Property—Option—IP Codec
Priority
9.18 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT128—Port Property—Main—P2P Group
9.18 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT128—Port Property—Main—P2P Group
Name
9.18 PBX Configuration—[1-1] Configuration—Slot—V-SIPEXT128—Port Property—FAX/T.38
Feature Manual References
5.2.1 IP Proprietary Telephone (IP-PT)
5.1.2 Group
5.2.4 Portable Station (PS) Features
5.2.4.1 Portable Station (PS) Connection
Description
This PBX supports the connection of a PS. Cell Stations (CSs) allow PSs to receive reception within a
designated area. It is possible to use the PBX features using the PS like a PT.
Conditions
•
The PS registration is required through the system programming. To avoid unexpected registration to
another PBX, the Personal Identification Number (PIN) for the PBX is necessary to register a PS. The
registration can be cancelled.
•
Handover
Even if a PS user moves during a conversation, the PS will automatically switch between cells without
disconnecting the call (Handover).
Handover is available in any of the following cases:
1.
During a conversation with an extension or outside party.
400
Feature Manual
Advertisement
Table of Contents
