Table of Contents
Advertisement
2.21.2 Flexible Buttons
Button
Call Park (Automatic Park Zone)
Call Log
Log-in/Log-out
*1
Hurry-up
Wrap-up
*1
System Alarm
Time Service
*1
Answer
Release
Toll Restriction/Call Barring
ISDN Service
Calling Line Identification
Restriction (CLIR)
Connected Line Identification
Restriction (COLR)
ISDN Hold
Headset
Time Service Switching Mode
(Automatic/Manual)
Two-way Record
Two-way Transfer
One-touch Two-way Transfer
Live Call Screening (LCS)
Voice Mail (VM) Transfer
Check-in
Check-out
200
Feature Manual
Used to park a call in an idle PBX parking zone automatically.
Used to show the incoming call information.
Used to switch between log-in and log-out mode.
Used to redirect the longest waiting call in the queue of an
incoming call distribution group to the overflow destination.
Used to switch the Wrap-up/Not Ready and Ready modes.
Used to confirm a PBX error. Also, pressing the System Alarm
button displays the current Multi-Connection network status.
Used to switch the assigned time modes: day, lunch, break or
night. Also used to check the current time mode status.
Used to answer an incoming call.
Used to disconnect the line during or after a conversation, or to
complete a Call Transfer.
Used to change the TRS/Barring level of other extension users
temporarily.
Used to access an ISDN service.
Used to switch between the CLIP and CLIR service.
*1
Used to switch between the COLP and COLR service.
*1
Used to transfer a call using the telephone company.
Used to turn on/off the headset mode while idle.
Used to switch between hands-free mode and headset modes
during a conversation.
Used to switch between the Automatic Switching and Manual
Switching mode.
*1
Used to record a conversation into your own mailbox.
Used to record a conversation into the mailbox of a specified
extension.
Used to record a conversation into the mailbox of a specified
extension with one touch.
Used to monitor your own voice mailbox while an incoming caller
is leaving a message and, if desired, intercept the call.
Used to transfer a call to the mailbox of a specified extension. Also
used to access the Unified Messaging system (→ 3.2 System and
Subscriber Features).
Used to switch the status of extensions from Check-out to Check-
in.
Used to switch the status of extensions from Check-in to Check-
out.
Usage
Advertisement
Table of Contents
