Table of Contents
Advertisement
Note
The operation of these buttons during a conference group call is different from the operations for the
Conference feature (→ 2.14 Conference Features).
Button
DSS
CONF (Conference)
TRANSFER
FLASH/RECALL (Flash/Recall
mode)
SP-PHONE
A member extension can inform the caller that he wants to speak or join the conversation by sending a
notification. The caller will hear a notification tone and the requesting extension's information will be shown
on the display for five seconds.
Conference Groups
Eight conference groups can be programmed, and a maximum of 31 members can be assigned to each
group. The available destinations as members of the conference group are as follows:
Wired Extension (PT/SLT/SIP Extension/ISDN Extension/T1-OPX)
PS
Incoming Call Distribution Group
PS Ring Group
UM Group
Fax Unit
External Pager (TAFAS)
DISA
Idle Line Access no. + Phone no.
Trunk Group Access no. + Trunk Group no. + Phone no.
Other PBX Extension (TIE with no PBX Code)
Other PBX Extension (TIE with PBX Code)
Only available when the networking type of the trunk is assigned as private.
*1
Join After Time Out
When conference group members do not answer a conference group call within the preprogrammed time
limit, the member's telephones will stop ringing. However, even after the time limit has expired, members
can join the conference.
Disables or enables the corresponding member's ability to speak.
Establishes a conversation with the current members in the order
assigned in the conference group. Pressing this button again will
add the next available member in the group to the conversation.
Removes the member who joined the conversation last. The
member can still listen to the announcement.
Removes the member who joined the conversation last. The
member will be disconnected from the conference group call and
hear a reorder tone.
Enables a hands-free conversation.
Destination
2.15.1 Conference Group Call
Function
Availability
ü
ü
ü
ü
ü
*1
ü
*1
Feature Manual
161
Advertisement
Table of Contents
