Table of Contents
Advertisement
2.1.1 Incoming Trunk Call Features
→ 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—DDI/DID Name
*2
→ 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—CLI Ring for DDI/DID—Day, Lunch, Break, Night
*3
→ 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—DDI / DID Destination—Day, Lunch, Break, Night
*4
Note
The following settings can also be specified in the DID/DDI table:
•
Tenant number: determines the time mode (day/lunch/break/night) for the corresponding trunk.
•
UM service group number: determines the service group to use when a call is handled by the Unified
Messaging system.
Explanation:
If the DID/DDI number is "123-4567":
1.
Checks the number in the table.
→ Matches the number in location 0001.
2.
Checks the time mode.
In Day mode: CLI is enabled. Route to CLI destination.
In Lunch mode: CLI is disabled. Route to DID/DDI destination, extension 100.
Conditions
•
To use this feature, DID/DDI service must be assigned as the distribution method for a trunk port.
•
DID/DDI Number Modification
It is possible to modify a received DID/DDI number, which may be convenient when programming the
DID/DDI table. The modification method (removed number of digits/added number) can be programmed
on a trunk port basis.
[Modification Example]
Removed number of digits: 6
Added number: 10
Received DID/DDI number: 87654321
•
Inter-digit Time
When the Inter-digit time expires, the PBX stops receiving the DID/DDI number and starts to check the
DID/DDI table. (Refer to the [Programming Example of DID/DDI Table] above).
Even if the Inter-digit time does not expire, the PBX stops receiving the DID/DDI number when the
received number is found in the DID/DDI table. The PBX then routes the call to the corresponding
destination. If the received number matches several entries in the table, the call is directed to the
destination of the first matching entry.
[Example]
If a call is received in Lunch mode;
Received Number
123-4567
123-456
28
Feature Manual
Modified DID/DDI number: 876543 21 = 1021
Destination
Extn. 100
Extn. 101
1) Remove the
first 6 digits.
Explanation
The PBX finds the match in location 0001 in the table
after receiving "7". So the call is routed to extension
100.
The Inter-digit time expired after receiving "6". The
PBX finds the match in location 0003 in the table. So
the call is routed to extension 101.
2) Add "10".
Advertisement
Table of Contents
