Table of Contents
Advertisement
pickup group. The user can view the caller's information on the LCD while their PT is idle. The call can be
picked up by pressing the ANSWER button.
Note
While the caller information is displayed on the LCD, going off-hook will not answer the call.
[Example]
Telephone Company
Outside Party
(01-2345-6789)
Caller's name
Caller's number
Called Extn. Information
Extension Number
Extension Name
Absent Message
Extn. 102
(Idle)
Call Pickup Deny:
Preventing other extensions from picking up calls ringing at your extension is also possible.
Conditions
•
Call Pickup applies to:
Intercom, trunk, and doorphone calls
•
Internal Call Block
An extension that is restricted by COS from calling certain extensions (→ 2.1.2.2 Internal Call Block) also
cannot pick up any calls ringing at those extensions.
[Directed Call Pickup]
•
A user can also pick up a call to a specified extension by pressing the corresponding DSS button. This
feature is only available when (1) the user's extension is allowed to use this feature through COS
programming, (2) DSS buttons for extensions or incoming call distribution (ICD) groups have this feature
enabled through system programming, and (3) the light pattern of DSS buttons for incoming calls to
extensions or ICD groups is set to "On or Flash" through system programming.
PBX
Extn. 101
(Ringing)
Caller's name
Caller's number
Called Extn. Information
Extn. 103
(Idle)
Extension Number
Extension Name
Absent Message
Extn. 104
(Idle)
2.4.3 Call Pickup
Call Pickup Group
Caller's name
Caller's number
Called Extn. Information
Extension Number
Extension Name
Absent Message
Feature Manual
79
Advertisement
Table of Contents
