Table of Contents
Advertisement
4.2.1 Multi-connection Networking Overview
Extension Number
104
:
3.
In the COS settings, ensure that access to trunk group 3, as assigned in step 1, is not blocked for the
selected COS (COS 2, as assigned in step 2), but is blocked for all other COS.
→ 10.7.2 PBX Configuration—[2-7-2] System—Class of Service—External Call Block
Programming example
COS Number
1
2
3
4
:
×：Blocked
Similarly, you can create a System Speed Dialing directory for a site by grouping all extensions at that
site as a tenant.
→ (5.1.3 Tenant Service)
Networks that span multiple time zones
The time zone is set independently for each PBX in a Multi-connection network. The PBX can acquire the
current time either automatically from the NSX Server Unit, an NTP (Network Time Protocol) server or caller
ID information over ISDN, or the time can be set manually.
Certain PBX features use the local PBX's time information during operation, and other features use the NSX
Server Unit's time information. The following table lists which features use which time information:
Incoming Call Log Time, TAM Log Time
ARS route plan
Time Mode
Timed reminder
Holiday table
Week table
Summer table
Room status
Print message information
Billing information
Remote timed reminder
Other hotel related features
Call information
330
Feature Manual
Extension Name
Dixon
:
Outgoing Trunk Group
1
2
3
4
x
x
x
x
Feature
COS
1
:
Operational permissions per site
Supported
Supported
Supported
Supported
Supported
Not supported
Supported
Not supported
Not supported
Not supported
Not supported
Not supported
Not supported
Advertisement
Table of Contents
