Panasonic KX-NSX1000 Manual page 27

[Method Flowchart]
Is the DID/DDI number found in
the DID/DDI table?
Does the call have its CLI*
information and is CLI mode
enabled for the time mode?
Yes
Is the CLI destination assigned?
Is the DID/DDI destination
for the time mode assigned?
The call is routed to the
CLI destination.
*: Calling Line Identification (CLI) Distribution:
If the CLI routing is enabled and the caller's identification number is assigned in the Caller ID
Table, the call will not be routed to the DID/DDI destination, but routed to the CLI destination.
[Programming Example of DID/DDI Table]
DDI can be programmed as DID.
Location No.
0001 123-4567
0002 123-2468
0003 123-456
: :
→ 18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table—DDI / DID Number
*1
A trunk call is received.
Yes
Yes
CLI works.
No
Yes
The call is routed to the
DID/DDI destination.
Name
*1 *2
John Enable
White
Tom Enable
Smith
A Enable
company
:
No
No
number match an extension
number at another PBX or
No
The call is routed to the
operator (Intercept
Routing—No Destination).
CLI
*3
Day Lunch
Disable
Disable
Disable
: :
2.1.1 Incoming Trunk Call Features
Does the DID/DDI
number match an
extension number?
No
The call is routed
to the extension.
Does the DID/DDI
Trunk Access no.?
No
The call is routed
to the TIE line or
trunk.
Destination
... Day Lunch
... 105 100
... 102 100
... 101 101
: :
Feature Manual
Yes
Yes
*4
...
...
...
...
: :
27