Fiat 1996 Brava Service Manual page 868

Bodywork
Interior trim
70.
Working from beneath the steering wheel,
remove plug (A) from bonnet opening
lever (B) , then disconnect end (C) of the
opening cable from seat (D).
Release opening cable fastener (E) from
seat (F) on the body.
Fasten the opening cable to a probe
in order to facilitate refitting through
the bulkhead between engine bay
and passenger compartment.
Withdraw and disconnect the bonnet
opening cable by releasing from the
retaining clip.
NOTE Reverse order of removal operations to
refit.
Bravo-Brava
Copyright Fiat Auto
15