Bravo-Brava
Introduction
Planned maintenance
oo.
P4A14BX04
2.
Check that the centering dowel on the timing
drive gear is in line with the engine. Also re
move the inspection cover on the bell hous
ing and check that the reference on the fly
wheel coincides with the reference on the
actual bell housing.
Loosen the timing belt tension acting on
the nut shown in the diagram, then re
move the actual belt.
Fitting the timing belt
3. To facilitate the positioning of the timing
belt, loosen the bolt fixing the inlet side
camshaft pulley and the exhaust side pul
ley, using tool 1860831000. These pullies
have slots, allowing the correct matching
of the belt-pulley.
4. Fit the belt observing the following order:
1. Crankshaft drive pinion - 2. Fixed pulley
- 3. Camshaft pulley, exhaust side - 4.
Camshaft pulley, inlet side - 5. Automatic
tensioner pulley - 6. Water pump pulley.
NOTE
The belt should be fitted
avoiding
any bends at acute angles in not to
adversely affect the structure of the
actual belt.
Fit the belt so that the arrow is point
ing in the direction of rotation of the
engine. There are three reference
markes on the belt for fitting during
production.
Copyright by Fiat Auto
31