Fiat 1996 Brava Service Manual page 772

Bravo-Brava
9 8 range
Electrical equipment
Radio equipment
3 2 1
ISbffiC Offl I S H H C O F F
55.
Setting the T I M E
The frequency selection buttons required for
the adjustment of the hour are:
Buttons 2 and 3 for setting the hour
Buttons 4 and 5 for setting the minutes
To start the clock with precision, press the
EXP button (1) briefly.
Synchronizing the clock
This allows the clock to be synchronized w i t h
the RDS TIMER signals transmitted by the
broadcaster.
By pressing frequency selection button 5 (2)
the message on the display will be "SYNC
ON", whilst if frequency selection button 4
(3) is pressed the message "SYNCH OFF"
will appear on the display.
Minimum volume for listening to traffic
news
The desired level can be set using frequency
selection buttons 4 (1) and 5 (2) to increase
or decrease the volume, respectively.
During the adjustment, the message "TAVOL
YY" will appear on the display where YY re­
fers to the volume level set.
Switching LIMR on/off (radio function)
This makes it possible to switch the search
for RDS traffic new broadcasters on or off.
The frequency selection buttons for s w i t c h ­
ing it on and off are buttons 4 (1) and 5 (2),
respectively.
The messages "LRN O N " and "LRN OFF" re­
spectively, will appear on the display when
the function is switched on or off.
P4A73HL03
Copyright by Fiat Auto
XI-98 - Update
73