Fiat 1996 Brava Service Manual page 829

Braking system
Hydraulic operation
Bravo-Brava ty
TO 75
33.
P4A36DA01
n
i=?=
A(S<c
1. Release the EG R control unit wiring bundle
from the clips shown.
2. Move the lining of the bulkhead between
engine bay and cabin further to one side,
then disconnect the vacuum inlet pipe
from the brake servo.
Undo nuts securing the brake pump to the
brake servo, then take the pump out
slightly without disconnecting the brake
lines.
4
©
il^x
ir!\\ v-""
Continue by removing parts from in­
side the car and then removing the
brake servo as described for the 1370
12v version. Note that the air line
shown in the figure alongside must
also be disconnected for the 1910TD
version.
16
Publication no. 508.876